SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Light Oxide, Straightened, 0.011" Diameter, 36" Length (Pack of 1)

Product Details

Nitinol Super Elastic Wire ASTM F2063 Annealed, Straightened, Cut, Light Oxide Finish gets its name from its elemental composition and the discovery team who first recognized the potential of this powerful alloy (Nickel Titanium Naval Ordinance Laboratory). Nitinol alloys have the intriguing ability to recover a preset shape, even after drastic distortion. Composition is typically 55-56 percent Nickel and 44-45 percent Titanium, but slight adjustments of this ratio can significantly impact the properties of the material. There are two primary but overlapping categories of Nitinol. Our Nitinol Wire is a SuperElastic alloy which can be strained at least eight to ten times more than ordinary spring steel without permanent deformation. It can be rather severely compressed, bent or otherwise distorted, but snaps back to its preset or trained shape with considerable force that can be used as work. A new memory is imparted by restraining the material in exactly the shape required and heating to a temperature above 932F (500C) for a minimum of five minutes. The shape will be set upon cooling and will exhibit the same flexibility and resistance to deformation as the original wire. It can be repeatedly retrained to achieve new shapes. Prosthetic devices routinely utilize Nitinol alloys. Excellent corrosion resistance and biocompatibility contribute to Nitinols continued growth in the medical device world. Length Tolerance is + 1/8 / - 0 inches.

• ASTM F2063
• Straight, Annealed Temper
• Super Elastic Alloy
• May be Strained 8-10 times More Than Spring Steel
• Superior Corrosion Resistance

Customer Reviews ::

See Also : >>!@ Buy Low Prices Online Now

Stainless Steel 304V Wire, Precision Ground, Straightened (Vacuum-Arc Remelt), 0.024" Diameter, 30" Length (Pack of 1)

Product Details

Stainless Steel Type 304V Wire (ASTM A313) is spring tempered, drawn, straightened, cut and cleaned with a bright finish.It is used for dental wire, stylets, guide wires and catheter wires. Type 304V (Vacuum Arc Remelted) is formulated similar to commercial quality stainless steel, but it has been refined by melting or remelting in a vacuum, a process that segregates the melt from oxygen, nitrogen and other ambient gases, resulting in a cleaner, higher-quality, more pure stainless steel. This contributes to the extra bright finish, clean and gun-barrel straight features. Some sizes fit inside diameters of our Hypodermic Tubing. NOTE: When ordering wire, always specify exact dimensions in decimals. Stating gauge sizes can lead to confusion, since wire diameters may conform to various gauging systems. Hypodermic Tubing gauges are based on the Birmingham Gage, also known as Stub's Iron Wire Gage.

• ASTM A313
• Ultra Clean Vacuum Arc Remelted
• Spring Temper
• Precision Drawn
• Straightened

Customer Reviews ::

Tags : >>!@ Buy Low Prices Online Now

SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.010" Diameter, 72" Length (Pack of 1)

Product Details

Nitinol Super Elastic Wire ASTM F2063 Annealed, Straightened, Cut gets its name from its elemental composition and the discovery team who first recognized the potential of this powerful alloy (Nickel Titanium Naval Ordinance Laboratory). Nitinol alloys have the intriguing ability to recover a preset shape, even after drastic distortion. Composition is typically 55-56 percent Nickel and 44-45 percent Titanium, but slight adjustments of this ratio can significantly impact the properties of the material. There are two primary but overlapping categories of Nitinol. Our Nitinol Wire is a SuperElastic alloy which can be strained at least eight to ten times more than ordinary spring steel without permanent deformation. It can be rather severely compressed, bent or otherwise distorted, but snaps back to its preset or trained shape with considerable force that can be used as work. A new memory is imparted by restraining the material in exactly the shape required and heating to a temperature above 932F (500C) for a minimum of five minutes. The shape will be set upon cooling and will exhibit the same flexibility and resistance to deformation as the original wire. It can be repeatedly retrained to achieve new shapes. Prosthetic devices routinely utilize Nitinol alloys. Excellent corrosion resistance and biocompatibility contribute to Nitinols continued growth in the medical device world. Length Tolerance is + 1/8 / - 0 inches.

• ASTM F2063
• Straight, Annealed Temper
• Super Elastic Alloy
• May be Strained 8-10 times More Than Spring Steel
• Superior Corrosion Resistance

Customer Reviews ::

See Also : >>!@ Buy Low Prices Online Now

Stainless Steel 316LVM Wire, Straightened (Vacuum-Arc Remelt), 0.086" Diameter, 60" Length (Pack of 1)

Product Details

Stainless Steel 316LVM Wire (ASTM F138 Chemistry Only) is 316L (VM is Vacuum Arc Remelted). The wire is spring tempered, drawn, straightened, cut and cleaned with a bright finish. The wire only meets chemistry of ASTM F138 due to loss in tensile strength as a result of the straightening process yielding a 10% loss in strength. It does however meet ASTM A313 for tensile strength. 316LVM is formulated similar to commercial quality stainless steel, but has been refined by melting or re-melting in a vacuum, a process that segregates the melt from oxygen, nitrogen and other ambient gases, resulting in a cleaner, higher-quality, more pure stainless steel. 316LVM Stainless Steel offers high corrosion resistance for many conditions, particularly when working with phosphoric and acetic acids. This wire comes gun-barrel straight and clean with a bright finish. Many of the sizes listed fit inside diameters of our Hypodermic Tubing. NOTE: When ordering wire, always specify exact dimensions in decimals. Stating gage sizes can lead to confusion, since wire diameters may conform to various gaging systems. Hypodermic tubing gage sizes are based on the Birmingham Gage, also known as Stub's Iron Wire Gage.

• ASTM F138
• Ultra Clean Vacuum Arc Remelted
• Spring Temper
• Precision Drawn
• Straightened

Customer Reviews ::

Visit : >>!@ Buy Low Prices Online Now

Stainless Steel 304V Wire, Precision Ground, Straightened (Vacuum-Arc Remelt), 0.071" Diameter, 60" Length (Pack of 5)

Product Details

Stainless Steel Type 304V Wire (ASTM A313) is spring tempered, drawn, straightened, cut and cleaned with a bright finish.It is used for dental wire, stylets, guide wires and catheter wires. Type 304V (Vacuum Arc Remelted) is formulated similar to commercial quality stainless steel, but it has been refined by melting or remelting in a vacuum, a process that segregates the melt from oxygen, nitrogen and other ambient gases, resulting in a cleaner, higher-quality, more pure stainless steel. This contributes to the extra bright finish, clean and gun-barrel straight features. Some sizes fit inside diameters of our Hypodermic Tubing. NOTE: When ordering wire, always specify exact dimensions in decimals. Stating gauge sizes can lead to confusion, since wire diameters may conform to various gauging systems. Hypodermic Tubing gauges are based on the Birmingham Gage, also known as Stub's Iron Wire Gage.

• ASTM A313
• Ultra Clean Vacuum Arc Remelted
• Spring Temper
• Precision Drawn
• Straightened

Customer Reviews ::

Thanks To : >>!@ Buy Low Prices Online Now

Stainless Steel 304V Wire, Precision Ground, Straightened (Vacuum-Arc Remelt), 0.053" Diameter, 30" Length (Pack of 5)

Product Details

Stainless Steel Type 304V Wire (ASTM A313) is spring tempered, drawn, straightened, cut and cleaned with a bright finish.It is used for dental wire, stylets, guide wires and catheter wires. Type 304V (Vacuum Arc Remelted) is formulated similar to commercial quality stainless steel, but it has been refined by melting or remelting in a vacuum, a process that segregates the melt from oxygen, nitrogen and other ambient gases, resulting in a cleaner, higher-quality, more pure stainless steel. This contributes to the extra bright finish, clean and gun-barrel straight features. Some sizes fit inside diameters of our Hypodermic Tubing. NOTE: When ordering wire, always specify exact dimensions in decimals. Stating gauge sizes can lead to confusion, since wire diameters may conform to various gauging systems. Hypodermic Tubing gauges are based on the Birmingham Gage, also known as Stub's Iron Wire Gage.

• ASTM A313
• Ultra Clean Vacuum Arc Remelted
• Spring Temper
• Precision Drawn
• Straightened

Customer Reviews ::

See Also : >>!@ Buy Low Prices Online Now

SuperElastic Nitinol (56% Nickel, 44% Titanium) Wire, Straightened, 0.011" Diameter, 72" Length (Pack of 1)

Product Details

Nitinol Super Elastic Wire ASTM F2063 Annealed, Straightened, Cut gets its name from its elemental composition and the discovery team who first recognized the potential of this powerful alloy (Nickel Titanium Naval Ordinance Laboratory). Nitinol alloys have the intriguing ability to recover a preset shape, even after drastic distortion. Composition is typically 55-56 percent Nickel and 44-45 percent Titanium, but slight adjustments of this ratio can significantly impact the properties of the material. There are two primary but overlapping categories of Nitinol. Our Nitinol Wire is a SuperElastic alloy which can be strained at least eight to ten times more than ordinary spring steel without permanent deformation. It can be rather severely compressed, bent or otherwise distorted, but snaps back to its preset or trained shape with considerable force that can be used as work. A new memory is imparted by restraining the material in exactly the shape required and heating to a temperature above 932F (500C) for a minimum of five minutes. The shape will be set upon cooling and will exhibit the same flexibility and resistance to deformation as the original wire. It can be repeatedly retrained to achieve new shapes. Prosthetic devices routinely utilize Nitinol alloys. Excellent corrosion resistance and biocompatibility contribute to Nitinols continued growth in the medical device world. Length Tolerance is + 1/8 / - 0 inches.

• ASTM F2063
• Straight, Annealed Temper
• Super Elastic Alloy
• May be Strained 8-10 times More Than Spring Steel
• Superior Corrosion Resistance

Customer Reviews ::

Visit : >>!@ Buy Low Prices Online Now

Tungsten Wire, Straightened, 0.044" Diameter, 60" Length (Pack of 1)

Product Details

Tungsten Wire Type 1A (As drawn) Commercially Pure Min. 99.95 percent non-sag and cut (ASTM F288 Type 1A) has excellent strength at high temperature and exceptional resistance to corrosion with good electrical and heat conducting properties. Its melting point is 6150 F (3400 C), the highest of any metal. Tungsten also has the highest modulus of elasticity of all metals. Tungsten Wire is straight, 30 or 60 inches long. Chemically, tungsten is relatively inert. Pure tungsten metal in the form of wire, rod and sheet is important in the electric lamp and electrical industries. Industrial applications include electrodes for inert gas welding and electrical discharge machining. ASTM F 288-96 Type 1A Commercially pure 99.95 percent.

• ASTM 288
• Type 1A As Drawn
• 99.95% Non Sag
• Melting Point 6150 Degrees F
• EDM Rod

Customer Reviews ::

My Links : >>!@ Buy Low Prices Online Now

Stainless Steel 17-7 PH Wire, Condition C, Straightened, 0.026" Diameter, 60" Length (Pack of 5)

Product Details

Our 17-7 PH precipitation-hardened Spring Temper Wire (ASTM 313 Chemistry Only) is furnished cold drawn in Condition C (AMS 5678), cleaned and straightened. Its elastic properties permit reforming into a specific shape and it can be formed into springs or into required patterns as in the case of diagnostic catheters. This is accomplished by taking the formed cold drawn wire (Condition C) and aging it at 900F (482C) for one hour (to Condition CH900). 17-7 Spring Wire provides good corrosion resistance, excellent fatigue properties and minimum distortion during heat treatment. In addition, the material retains its load bearing properties with little or no relaxation up to 850 degrees F. Furnished in "gun barrel straight lengths. Compatible with tube gauges 25-26.

• ASTM 313
• Condition C AMS 5678
• Spring Temper
• Load Bearing Up To 850 F
• Precision Tolerances

Customer Reviews ::

Related : >>!@ Buy Low Prices Online Now

Steel Music Wire, Straightened, 0.125" Diameter, 36" Length (Pack of 10)

Product Details

Music wire is a high grade, uniform steel wire originally intended for strings in musical instruments. It is widely used in the manufacture of spiral springs and mandrels. AISI 1085 spring wire has excellent fatigue properties and will endure high stress. This wire is made in accordance with ASTM A228 (Chemical / Tensile Only)

• ASTM A228
• AISI 1085
• Excellent Fatigue Properties
• Used in springs, musical instruments and as mandrels

Customer Reviews ::

Small Parts,Inc.--- Mecca for the Weird - John B. Egert - Port of New Mexico
All right... if you have a berserk taste for the Tiny Life, you need to get to know Small Parts, Inc. For reasons best left unexplained, I developed a fetish for building 1/700 Napoleonic ships-- and a need for the smallest wire,cable, and tool sizes I could find...AND... hello SPI. If it's obscenely small, they have it. I know that technoheads and lab rats use this stuff all the time, but us right-side brain types are astonished by what's going on in this micro world. This stiff wire, and other sizes down to .001, have only the disadvantage that I can't freaking SEE it. They mail this straightened wire in long tubes, and for awhile, I was really P.O.'d that the tubes were empty-- until I broke out the Optivisor.....
Great stuff, great service. The online catalog is hard to negotiate for us dimwits because of its size and complexity, but you get the hang of it pretty quickly.
I love these people.......

My Links : >>!@ Buy Low Prices Online Now

Stainless Steel 17-4 Wire, Condition A, Straightened, 0.026" Diameter, 72" Length (Pack of 5)

Product Details

Stainless Steel 17-4 PH (Type 630) Condition A. ASTM F899 (Chemistry Only) Annealed, Drawn, Cleaned, Straightened, and Cut with Bright Finish. This Martensitic Precipitation Hardening Stainless Steel is provided in Condition A (annealed) and can be subjected to eight standard heat treatments that have been developed for post fabrication conditioning. This alloy is widely used in the aerospace, chemical, petrochemical, food processing, paper, and general metalworking industries. Short-time, low temperature heat treatments minimize distortion and scaling. 17-4 PH provides an outstanding combination of high strength, good corrosion resistance, good mechanical properties at temperatures up to 600 Deg F (316 Deg C), and good toughness in both base metal and welds.

• High Strength
• Good Corrosion Resistance
• ASTM F899 Chemistry
• Cleaned and Straightened
• Heat Treatable

Customer Reviews ::

Thanks To : >>!@ Buy Low Prices Online Now

Steel Music Wire, Straightened, 0.098" Diameter, 72" Length (Pack of 5)

Product Details

Music wire is a high grade, uniform steel wire originally intended for strings in musical instruments. It is widely used in the manufacture of spiral springs and mandrels. AISI 1085 spring wire has excellent fatigue properties and will endure high stress. This wire is made in accordance with ASTM A228 (Chemical / Tensile Only) and supplied in 72 inch lengths. It is available with a Material Certification with Chemistry upon request.

• ASTM A228
• AISI 1085
• Excellent Fatigue Properties
• Used in springs, musical instruments and as mandrels
• Precision Tolerances

Customer Reviews ::

Small Parts,Inc.--- Mecca for the Weird - John B. Egert - Port of New Mexico
All right... if you have a berserk taste for the Tiny Life, you need to get to know Small Parts, Inc. For reasons best left unexplained, I developed a fetish for building 1/700 Napoleonic ships-- and a need for the smallest wire,cable, and tool sizes I could find...AND... hello SPI. If it's obscenely small, they have it. I know that technoheads and lab rats use this stuff all the time, but us right-side brain types are astonished by what's going on in this micro world. This stiff wire, and other sizes down to .001, have only the disadvantage that I can't freaking SEE it. They mail this straightened wire in long tubes, and for awhile, I was really P.O.'d that the tubes were empty-- until I broke out the Optivisor.....
Great stuff, great service. The online catalog is hard to negotiate for us dimwits because of its size and complexity, but you get the hang of it pretty quickly.
I love these people.......

Tags : >>!@ Buy Low Prices Online Now

Stainless Steel 17-7 PH Wire, Condition C, Straightened, 0.040" Diameter, 60" Length (Pack of 1)

Product Details

Our 17-7 PH precipitation-hardened Spring Temper Wire (ASTM 313 Chemistry Only) is furnished cold drawn in Condition C (AMS 5678), cleaned and straightened. Its elastic properties permit reforming into a specific shape and it can be formed into springs or into required patterns as in the case of diagnostic catheters. This is accomplished by taking the formed cold drawn wire (Condition C) and aging it at 900F (482C) for one hour (to Condition CH900). 17-7 Spring Wire provides good corrosion resistance, excellent fatigue properties and minimum distortion during heat treatment. In addition, the material retains its load bearing properties with little or no relaxation up to 850 degrees F. Furnished in "gun barrel straight lengths. Compatible with tube gauges 25-26.

• ASTM 313
• Condition C AMS 5678
• Spring Temper
• Load Bearing Up To 850 F
• Precision Tolerances

Customer Reviews ::

Related : >>!@ Buy Low Prices Online Now

Stainless Steel 17-7 PH Wire, Condition C, Straightened, 0.022" Diameter, 60" Length (Pack of 5)

Product Details

Our 17-7 PH precipitation-hardened Spring Temper Wire (ASTM 313 Chemistry Only) is furnished cold drawn in Condition C (AMS 5678), cleaned and straightened. Its elastic properties permit reforming into a specific shape and it can be formed into springs or into required patterns as in the case of diagnostic catheters. This is accomplished by taking the formed cold drawn wire (Condition C) and aging it at 900F (482C) for one hour (to Condition CH900). 17-7 Spring Wire provides good corrosion resistance, excellent fatigue properties and minimum distortion during heat treatment. In addition, the material retains its load bearing properties with little or no relaxation up to 850 degrees F. Furnished in "gun barrel straight lengths. Compatible with tube gauges 25-26.

• ASTM 313
• Condition C AMS 5678
• Spring Temper
• Load Bearing Up To 850 F
• Precision Tolerances

Customer Reviews ::

Visit : >>!@ Buy Low Prices Online Now

Stainless Steel 17-7 PH Wire, Condition C, Straightened, 0.057" Diameter, 30" Length (Pack of 10)

Product Details

Our 17-7 PH precipitation-hardened Spring Temper Wire (ASTM 313 Chemistry Only) is furnished cold drawn in Condition C (AMS 5678), cleaned and straightened. Its elastic properties permit reforming into a specific shape and it can be formed into springs or into required patterns as in the case of diagnostic catheters. This is accomplished by taking the formed cold drawn wire (Condition C) and aging it at 900F (482C) for one hour (to Condition CH900). 17-7 Spring Wire provides good corrosion resistance, excellent fatigue properties and minimum distortion during heat treatment. In addition, the material retains its load bearing properties with little or no relaxation up to 850 degrees F. Furnished in "gun barrel straight lengths. Compatible with tube gauges 25-26.

• ASTM 313
• Condition C AMS 5678
• Spring Temper
• Load Bearing Up To 850 F
• Precision Tolerances

Customer Reviews ::

Friends Link : >>!@ Buy Low Prices Online Now

Stainless Steel 316LVM Wire, Straightened (Vacuum-Arc Remelt), 0.080" Diameter, 30" Length (Pack of 5)

Product Details

Stainless Steel 316LVM Wire (ASTM F138 Chemistry Only) is 316L (VM is Vacuum Arc Remelted). The wire is spring tempered, drawn, straightened, cut and cleaned with a bright finish. The wire only meets chemistry of ASTM F138 due to loss in tensile strength as a result of the straightening process yielding a 10% loss in strength. It does however meet ASTM A313 for tensile strength. 316LVM is formulated similar to commercial quality stainless steel, but has been refined by melting or re-melting in a vacuum, a process that segregates the melt from oxygen, nitrogen and other ambient gases, resulting in a cleaner, higher-quality, more pure stainless steel. 316LVM Stainless Steel offers high corrosion resistance for many conditions, particularly when working with phosphoric and acetic acids. This wire comes gun-barrel straight and clean with a bright finish. Many of the sizes listed fit inside diameters of our Hypodermic Tubing. NOTE: When ordering wire, always specify exact dimensions in decimals. Stating gage sizes can lead to confusion, since wire diameters may conform to various gaging systems. Hypodermic tubing gage sizes are based on the Birmingham Gage, also known as Stub's Iron Wire Gage.

• ASTM F138
• Ultra Clean Vacuum Arc Remelted
• Spring Temper
• Precision Drawn
• Straightened

Customer Reviews ::

See Also : >>!@ Buy Low Prices Online Now

Stainless Steel 316LVM Wire, Straightened (Vacuum-Arc Remelt), 0.030" Diameter, 60" Length (Pack of 5)

Product Details

Stainless Steel 316LVM Wire (ASTM F138 Chemistry Only) is 316L (VM is Vacuum Arc Remelted). The wire is spring tempered, drawn, straightened, cut and cleaned with a bright finish. The wire only meets chemistry of ASTM F138 due to loss in tensile strength as a result of the straightening process yielding a 10% loss in strength. It does however meet ASTM A313 for tensile strength. 316LVM is formulated similar to commercial quality stainless steel, but has been refined by melting or re-melting in a vacuum, a process that segregates the melt from oxygen, nitrogen and other ambient gases, resulting in a cleaner, higher-quality, more pure stainless steel. 316LVM Stainless Steel offers high corrosion resistance for many conditions, particularly when working with phosphoric and acetic acids. This wire comes gun-barrel straight and clean with a bright finish. Many of the sizes listed fit inside diameters of our Hypodermic Tubing. NOTE: When ordering wire, always specify exact dimensions in decimals. Stating gage sizes can lead to confusion, since wire diameters may conform to various gaging systems. Hypodermic tubing gage sizes are based on the Birmingham Gage, also known as Stub's Iron Wire Gage.

• ASTM F138
• Ultra Clean Vacuum Arc Remelted
• Spring Temper
• Precision Drawn
• Straightened

Customer Reviews ::

Visit : >>!@ Buy Low Prices Online Now